DXport with Winroute Instructions

Instructions on how to install DXport

Moderator: PuffinSoft

Post Reply
wsware
PuffinSoft
PuffinSoft
Posts: 717
Joined: Wed May 29, 2002 6:25 pm

DXport with Winroute Instructions

Post by wsware »

Winroute Instructions
Contributed by De-GeXte


See DXport Instructions for DXport screen shots

PC#1:
192.168.1.1
Running Winroute
Ports 2302-2311 (Do not run DXport on this Machine)

PC#2:
192.168.1.2
DXport Ports 2312-2321

PC#3:
192.168.1.3
DXport Ports 2312-2321


Winroute portmaps :
Image

DX8 support requires:
UDP 2312-2321 : 192.168.1.2
UDP 2322-2331 : 192.168.1.3

For DX7 support add:
TCP 2312-2321 : 192.168.1.2
TCP 2322-2331 : 192.168.1.3

Image

Now Play!

For best hosting results, host on PC#1

If you want to host on PC#2 add:

For DX7:
TCP 47624 : 192.168.1.2
UDP 47624 : 192.168.1.2

For DX8:
TCP 6073 : 192.168.1.2
UDP 6073 : 192.168.1.2
Last edited by wsware on Sun Jun 09, 2002 2:07 pm, edited 1 time in total.
De-GeXte
Posts: 24
Joined: Mon Jun 03, 2002 6:30 am
Location: Eindhoven (NL)
Contact:

Post by De-GeXte »

this set-up only works when pc2 and pc3 are connected to the same hub. Winroute uses the 3th number in the ip address as a group indentifier or something (i dunno exactly, im no tcp/ip freak, i just read the readme :wink: )

Image

if pc2 or pc3 is on a 3th nic in pc1 then its ip adress should be : 192.168.2.2
and the ip adres on the 3th nic should be : 192.168.2.1

Image

port mapping will be different in such a situation :
See my topic :
http://www.puffinsoft.com/forum/viewtopic.php?t=44

good luck
De-GeXte
Posts: 24
Joined: Mon Jun 03, 2002 6:30 am
Location: Eindhoven (NL)
Contact:

Re: DXport with Winroute Instructions

Post by De-GeXte »

wsware wrote: DX8 support requires:
UDP 2312-2321 : 192.168.1.2
UDP 2322-2331 : 192.168.1.3

For DX7 support add:
TCP 2312-2321 : 192.168.1.2
TCP 2322-2331 : 192.168.1.3
Winroute got 3 protocol settings : UDP , TCP or UDP/TCP
( 2 others too but they are of no use for DXports )

use the UDP/TCP setting for both directX 7 and 8.

Since i only use directX 8 my screenshot only contains UDP

The TCP portmaps on the screenshot are a little photoshop(?) trick by the admin ;)
Post Reply